Go To ↓ Navigation & Information Other Information

ENGINEERING TECHNOLOGY (EGTC 15.99)

EGTC 110. Computer Aided Design. 2-0-6. Prerequisite: EGSC 101. Descriptive geometry includes problems dealing with points, lines, planes, intersections, revolved primary and secondary views, true shapes and sections. Geometric dimensioning and tolerancing includes form controls, datums, orientation, position tolerancing, runout, and profiles. Computer aided design software (CAD) is used throughout the course. (15.0805)

EGTC 208. Statics. 2-2-0. Prerequisites: PHYS 101, 103, MATH 102, MNTC 110. Basic concepts of forces, moments, equilibrium, and cross-section properties of structures. Application to structures in equilibrium. (15.0805)

EGTC 210. Strength of Materials. 3-3-0. Prerequisite: EGTC 208. Co-registration: EGTC 220, 221. Analysis of force systems applied to rigid bodies at rest and analysis of internal stresses including: direct stress, shear stress, bending moments, beams, and columns. (15.0805)

EGTC 220. Engineering Materials. 3-3-0. Prerequisite: CHEM 101. Co-registration: EGTC 210, 221 or permission of department head. Properties and selection of ferrous metals and alloys, nonmetallic materials; corrosion. (15.0611)

EGTC 221. Materials Laboratory. 1-0-3. Prerequisites: CHEM 101, EGTC 208. Co-registration: EGTC 210, 220 or permission of department head. Experiments performed to demonstrate physical, chemical, electrical, and mechanical properties of engineering materials and the behavior of structures under loads. (15.0611)

EGTC 245. Electrical Principles. 3-3-0. Prerequisite: MATH 102. Co-requisite: EGTC 246 or permission of department head. DC and AC circuits including network analysis, electromagnetism, motors, generators, electronic devices, integrated circuits, digital logic circuits, and control systems. (15.0399)

EGTC 246. Electrical Principles Laboratory. 1-0-3. Credit or registration in EGTC 245 or permission of department head. Laboratory experiments in electrical circuits and devices. (15.0399)

EGTC 310. Thermal Systems. 3-3-0. Prerequisites: Credit in PHYS 101 and MATH 207. First and second laws of thermodynamics. Gases, vapors, power cycles, and engineering application. Elements of conduction, convection and radiation heat transfer. (15.0899)

EGTC 315. Fluid Power. 2-2-0. Prerequisite: EGTC 208. Co-registration: EGTC 316 or permission of department head. Statics and kinematics of fluid flow, fluid power systems including the generation, control and transmission of power via pressurized fluids. (15.0899)

EGTC 316. Fluid Power Laboratory. 1-0-3. Prerequisite: Co-registration: EGTC 315 or permission of department head. Laboratory to accompany EGTC 315. Properties and flow of fluids. Measurement of properties and flow parameters. Heat transfer in solids and fluids. (15.0899)

EGTC 415. Machine Design. 4-4-0. Prerequisite: MNTC 360. Co-registration: EGTC 416 or permission of department head. Design and selection of machine tools, machine elements, power-transmission units, and their components. (15.0805)

EGTC 416. Design Laboratory. 1-0-3. Prerequisite: MNTC 360. Co-registration: EGTC 415 or CETC 442 or permission of department head. Design Laboratory: jigs, fixtures, special tools for manufacturing and machine components. Practice of fabrication and manufacturing processes. (15.0805)

[Back][Top]

Go To ↑ Top